Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Installation Across Brea
Roof installation in Brea means working with homes built mostly between the 1960s and 1990s, plus newer hillside developments near the Brea Mall. Most full replacements here run $14,000 to $32,000 depending on pitch, material, and what we find under the old roof. We photograph everything, write the price before we start, and you’ll know exactly who is on their way before our truck pulls up. Call (831) 777-6412 for a free estimate.
Crestview Roofing Co West Covina serves the whole Brea area, from the older tracts off Brea Boulevard and Lambert Road up to the newer subdivisions in the hills. Dispatch and scheduling run through our Los Angeles office, and our crews work throughout Brea weekly. We answer calls with a live person 24/7 because a leaking roof at 2 a.m. doesn’t wait for business hours.
Why Crestview Roofing Co West Covina Is Brea’s Preferred Roof Installation Company
Dylan Pace built this company in 2000 on a simple idea: homeowners should see the real price before work starts. That’s why every Brea roof installation gets a written line-item quote. The number on the page is the number on the invoice. No allowances that quietly expand after tear-off, no change orders slipping in at the end.
Brea homeowners keep calling us back because we document everything. You get before-and-after photos of your roof, a live arrival time you can track from your phone, and a digital invoice sent by text when the job is done. The Relay Visibility Guarantee means you’re never guessing what we found or what it cost to fix. If a repair fails within 365 days, we return and correct it at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every job.
Our technicians are background-checked and uniformed, so you know who’s coming before they park. Brea has a lot of older homes with original framing and decking, and we’ve torn off enough roofs here to know exactly what lurks under the surface. Experience with local housing stock matters more than most roofers admit.
Styles & brands we work with
Shingle Roof in Brea
Shingle roof installation in Brea typically runs $9,000 to $18,000 for a standard single-family home, depending on square count, tear-off layers, and decking condition. Architectural asphalt shingles from GAF, CertainTeed, or Owens Corning are the most common choice for Brea homeowners who want strong wind performance without the weight of tile. We install using the manufacturer’s high-wind nailing pattern, which matters during Santa Ana events.
Many Brea homes, especially the 1960s and 1970s ranches, have low-slope sections over patios and additions. Those require modified bitumen or self-adhered underlayment transitioned properly to the shingle field. We detail every valley, penetration, and drip edge so water moves off the roof, not under it.
High-wind nailing and starter strip
Brea hillside homes get hit harder by wind-driven rain than lower-lying tracts. We install starter strips at every eave and rake, then nail shingles on the manufacturer’s specified pattern with ring-shank nails. Six nails per shingle in high-exposure zones. It costs a little more in labor and fasteners; it’s the difference between a roof that holds at 130 mph and one that lifts panels.
Ventilation and attic heat
Brea summers push attic temperatures well past 140°F, which curls cheap shingles within five years. We check ridge and soffit vent balance during every shingle roof installation. If airflow is inadequate, we add vents where the roof design allows. A properly vented attic also keeps the shingle warranty valid, which most manufacturers require.
Standing Seam Metal Roof in Brea
Standing seam metal roof installation in Brea runs $18,000 to $34,000 for most single-family homes. That’s higher than asphalt up front, but the roof typically lasts 40 to 60 years with minimal maintenance. Brea’s intense summer sun and Santa Ana wind cycles don’t degrade standing seam the way they do asphalt or old wood shake. We install 24-gauge galvanized or Galvalume panels with concealed fasteners and factory-applied finishes.
Metal roofs also help with hillside fire zone requirements. Brea’s wildland-urban interface areas look for Class A fire-rated assemblies, and standing seam metal achieves that rating with the right underlayment. If you want to move away from wood shake entirely, metal is a strong option.
Panel profile and seam height
Not all standing seam is the same. We use snap-lock or mechanically seamed panels depending on roof pitch and wind exposure. On steeper hillside roofs, mechanical seams hold up better under repeated wind cycles. Snap-lock works fine on standard 4:12 to 6:12 pitches across Brea’s flatter tracts. Both carry the manufacturer’s weathertight warranty.
Thermal movement and attachment
Metal expands and contracts with temperature swings, and Brea gets hot days followed by cool nights. We attach panels with sliding clips that allow movement without pulling fasteners loose. That detail separates a roof that stays quiet and leak-free from one that pops and creaks every afternoon. We also isolate the metal from treated lumber and dissimilar metals to prevent corrosion.
Trusted Brands We Service in Brea
We install GAF, CertainTeed, and Owens Corning architectural shingles, plus standing seam metal systems from leading metal manufacturers. Brea homeowners often ask about Boral concrete tile when they want to switch off old wood shake without a structural upgrade. We keep common trim, underlayment, and accessories stocked in our local vehicles, so most Brea projects don’t wait on material runs. Every installation is backed by the manufacturer’s warranty and our 365-Day Done Right Promise in writing.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Installation Problems We See in Brea Homes
- Rot at the eaves from Santa Ana-driven fog. Old wood shake roofs under new underlayment trap moisture during fog events before winter rain arrives. We find rotted eave boards and decking on homes that looked fine from the ground. We cut back the damage, replace what’s needed, and install proper edge ventilation.
- Failed drip edge on low-slope patio roofs. 1960s additions in Brea often have no drip edge or a corroded one. Water wicks back under the shingle course and stains the ceiling below. We install new drip edge with a proper overhang and seal the transition at the wall.
- Inadequate ridge ventilation causing curled shingles. Hillside homes with short ridge lengths overheat attics in summer. Architectural shingles curl at the edges within five years. We add ridge vent where the framing allows, and rebalance soffit intake to keep air moving.
- Split decking under old tile and shake. 1×6 decking on older Brea homes is often split beyond repair after decades of nails and movement. We replace damaged boards before installing new underlayment, and we write the allowance into the contract so you see the line item before we start.
Pricing for Roof Installation in Brea, CA
A full roof installation in Brea typically runs $14,000 to $32,000. Here’s the breakdown: architectural shingle roofs run $9,000 to $18,000. Standing seam metal runs $18,000 to $34,000. Lightweight concrete tile, when replacing old wood shake, runs $20,000 to $36,000 because of the tear-off labor and potential decking replacement. Low-slope sections over patio additions add $2,500 to $6,000 depending on size and membrane type.
What moves the number: layers of existing roof, decking condition once we open it up, roof pitch and access, and whether your home is in a hillside fire zone requiring Class A materials. We write allowances into the contract for unknowns, and any surprise is priced and approved in writing before we touch it. Call (831) 777-6412 for a free estimate on your Brea roof.
We Also Serve Cities Near Brea
Crestview Roofing Co West Covina serves Brea and the surrounding communities, including Rowland Heights, Hacienda Heights, West Covina, and Whittier. If you’re in one of those areas, we provide the same written pricing, live arrival tracking, and before-and-after photos. Learn more about our Roof Installation services or see what we cover across Brea.
Serving Brea, CA - Our Local Coverage Area
We’re based in the Brea area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Brea
Look for shake that flakes easily when touched, reveals unweathered wood underneath, or shows black soot-like residue. The fire retardant breaks down with time and repeated sun exposure, and once the wood is exposed, the roof no longer meets current hillside fire zone requirements. Our Brea crews can assess the remaining retardant during a free inspection. Call (831) 777-6412 and we’ll give you a straight answer.
Decking looks different from above than from below. Boards that appear sound from the attic can be split, water-damaged, or rotting at the fastener lines, especially on 1960s Brea homes with original 1×6 decking over skip sheathing. Nails won’t hold in split boards, and a new roof over bad decking fails within years. We write a decking allowance into every contract so you see the line item, and we only replace what’s actually damaged, with photo proof.
Yes, often. Lightweight concrete tile from Boral can weigh under 600 pounds per square, while traditional tile runs 800 to 1,000 pounds per square, and old waterlogged shake can be heavier than either. Many pre-1990 Brea homes have trusses designed for heavy roofing, and switching to lightweight tile means we can meet current hillside fire zone requirements without adding structural reinforcement. We verify truss capacity during inspection and tell you if reinforcement is needed, with a written price upfront. Call (831) 777-6412 for a free estimate.
Low-slope sections get a separate membrane system, typically modified bitumen or TPO, installed with proper taper and drainage. On a 1970s ranch in the Olinda Ranch tract, our crew pulled three layers of treated wood shake, found 1×6 decking split beyond repair, and installed a high-temperature ice and water shield at every valley and penetration. The low-slope patio roof was transitioned to a self-adhered membrane with new drip edge, so water no longer wicks back under the shingle course. We’ll do the same for your home, with a written price before any work begins.
A true 130 mph rating requires six nails per shingle in high-exposure zones, ring-shank fasteners, starter strips at every eave and rake, and proper underlayment attachment. Most Brea roofers default to four nails, which only rates to about 110 mph. We nail to the manufacturer’s high-wind pattern and document it with photos before the underlayment covers it. Call (831) 777-6412 to schedule your free estimate.
Written by Dylan Pace, Owner at Crestview Roofing Co West Covina, serving Brea and surrounding communities.